Geekvape Sonder Q2

• Adjustable Power: 5-30W for MTL and light DTL shooting
• Battery: 1350mAh built-in for about 3 days of battery life
• Pod capacity: 3ml with side filling
• RGB lights: 6 customizable colors for visual effect
• LED Display: Shows battery level and power
• Adjustable Airflow: Adapts the draw from MTL to light DTL
• Available resistances: 0.7Ω (light DTL) and 1.2Ω (MTL)
• USB-C Charging: Fast and Universal
• Material: Durable Zinc Alloy
• Protections: Short circuit, overload, timeout

First use:

1. Remove the pod from the battery
2. Open the side silicone cap
3. Fill up to 3ml with your favorite liquid
4. Close the cap again
5. Let it rest for 5-10 minutes
6. Reinsert the pod
7. Adjust the airflow by rotating the ring at the base of the pod
8. Inhale to activate (auto draw) or press the button

Power regulation:

• Press the button 3 times to enter the menu
• Adjust the power from 5W to 30W
• Resistance 0.7Ω: 18-25W (light DTL)
• Resistance 1.2Ω: 8-12W (MTL)

RGB Customization:

• Press the button 4 times to change color
• 6 colors available: red, blue, green, yellow, purple, cyan
• Turn off the lights by holding down for 2 seconds

• 30W Power: Versatile for MTL and light DTL
• RGB lights: 6 colors for visual customization
• LED Display: Battery and Power Check
• 3ml Pod: Larger capacity, fewer refills
• Adjustable Airflow: Adjust the shot to your preferences
• 1350mAh battery: Battery life of approximately 3 days
• USB-C Charging: Fast and Universal
• Futuristic Design: Modern and eye-catching aesthetics
• Dual activation: Automatic or push button fire
• Geekvape Support: Authorized Service Center in Fabriano

• Brand: Geekvape
• Model: Sonder Q2
• Dimensions: 96mm x 30mm x 16mm
• Weight: approximately 65g
• Battery: Built-in 1350mAh
• Power: 5-30W adjustable
• Pod capacity: 3ml
• Resistors: 0.7Ω (18-25W) and 1.2Ω (8-12W)
• Charging: USB-C 5V/1.5A
• Charging time: 45-60 minutes
• Display: LED with battery and power indicator
• RGB lights: 6 customizable colors
• Airflow: Adjustable from MTL to light DTL
• Material: Zinc Alloy + PCTG
• Activation: Auto shot or button
• Protections: Short circuit, overload, low voltage, 10s timeout

• 1 x Geekvape Sonder Q2 1350mAh Battery
• 1 x 3ml Pod with 0.7Ω resistance pre-installed
• 1 x Replacement Resistor 1.2Ω
• 1 x USB-C Cable
• 1 x User Manual
• 1 x Warranty Card

What is the difference between Sonder Q2 and Wenax M2?
The Sonder Q2 has adjustable wattage (5-30W), RGB lights, an LED display, a 3ml pod, and adjustable airflow. The Wenax M2 is a simpler pen-style device with a 1200mAh battery and a 2ml pod. The Q2 is more versatile (MTL and DTL), while the M2 is more compact and discreet (MTL only).

How do you adjust the airflow on the Sonder Q2?
Rotate the ring at the base of the pod to adjust the airflow. Closed = tight MTL draw, open = light DTL draw. Find the perfect position for your vaping preferences.

How long does the 1350mAh battery last?
The battery lasts about 3 days with average use. Battery life depends on the power used: at 10W (MTL) it lasts longer, at 25W (DTL) it drains faster.

How do you change RGB colors?
Press the button 4 times quickly to change colors. There are 6 colors available: red, blue, green, yellow, purple, and cyan. To turn off the lights, hold the button for 2 seconds.

What resistor should I use for MTL or DTL?
For MTL (tight draw): use a 1.2Ω resistor at 8-12W with a closed airflow. For light DTL (open draw): use a 0.7Ω resistor at 18-25W with an open airflow. Adjust to your preference.

Is the Sonder Q2 suitable for beginners?
Yes, but it's more suitable for vapers with a little experience who want to adjust power and airflow. For complete beginners, we recommend the Wenax M1/M2, which are simpler and more straightforward to use.

Can I use any liquid?
Yes, it's compatible with all liquids. For 1.2Ω resistance (MTL), we recommend VG/PG 50/50. For 0.7Ω resistance (light DTL), you can also use 60/40 or 70/30.